How To Install Car Headrest Dvd Player

A lot of people are ever searching for information on how to install headrest monitors in their specific vehicle. We thought we would accost that issue for you lot buyers out there who are looking for a step by stride guide. Remember, this is just a guide to installing some of our headrest DVD player monitors. Each installation will differ from vehicle to vehicle.

First matter you will want to do is remove your factory headrest. In many cases, this is done past pressing a button at the base of the headrest mail on the top of the seat. Once pressed, yous should exist able to slide the headrest and posts upwards until they are removed leaving the 2 post holes bachelor on the top of your seat.

Next you will want to take your headrest monitor DVD players and gently pull autonomously on the headrest posts until the are the exact aforementioned altitude autonomously equally your factory headrest post. Adjacent, if your seats have removable backings, thank God. No, really, that makes it very easy to continue. Remove the back of your seats if available. Take the headrest monitors with the two posts ( note the power cable is pre run through the headrest mail service already ) and drop the headrest into position through the mail service holes on the height of your seats. Exist certain to pull the cables that were run through your headrest monitor posts, down to the bottom of your seat. This is where the wiring connection to the ability harness will be made.

At present that you have the headrests in position and the headrest monitor cable pulled through, take your power harness which has your RCA connections and Power wires too every bit your cigarette adapter connection, and using the South-Video type of connector, Plug information technology into your headrest cable. ( Be sure to be gentle when plugging the two cables together, as to not damage the piffling "pins" in the connector )

Once connected yous tin can at present put the back of your seat encompass in identify if it was removed for your installation. Now you have 2 options to cull from for powering your headrest DVD monitor. You lot can simply take the cigarette adapter which was included in all our headrest monitor DVD packages, and plug it into the power harness adapter. One time plugged in, take the cigarette adapter end and plug that direct into your vehicles 12 V outlet. If you practice not want to apply the cigarette adapters and would like to hardwire the power harness, read on.

Now you have the ability harness connected to the headrest monitors below the seat and you lot have your standard reddish/black 2 wire connectedness. The ruby-red wire is for Power, and the black wire is for Footing. Have the black wire and secure it below the seat to the vehicle. The all-time option for this is usually to loosen one of the bolts that hold downwardly the actual frame of the vehicle seat to the vehicle. And so take the black wire, and secure it underneath that seat from bolt.

At present, for the red wire ( ability ) you lot take a few options, you can connect it to the vehicles battery which requires running a long lead wire from the bombardment back to and under your seat. We recommend for easy access to ability, to tap into your vehicles power seat wire or even the power lead in the eye console if available. The red wire tin be connected using a standard crimp cap or other crimp connection. In one case the Red and black wires are connected, turn on your DVD role player and enjoy your favorite picture.

Now, the last choice would be to use some Universal Mount headrest Monitor dvd Players and skip the entire installation procedure :-D

If you are looking for further information or need more detailed help, please click here to contact united states and nosotros will be certain to assist you in whatever way we can.

Source: http://customautoimages.blogspot.com/2013/09/how-to-install-headrest-monitor-dvd.html

Posted by: hagentordreptles.blogspot.com

Share this post