How to Install Nock Out® Lighted Nocks

/ in In Action Blog /

Installing Lighted Nocks | Nock Out® Contender Nocks

Nock Out® lighted nocks has developed an impressive lighted nock for compound shooters that is durable and accurate while existence elementary and easy to use. The Contender vertical lighted nocks fit X,H,S/GT shafts with the included universal bushing kit contained in each parcel, making them the perfect fit no matter what size arrow shaft is in your archery setup.

Nock Out® includes the needed bushings to make the Contender lighted nocks truly a universal fit for any arrow in the manufacture from 5mm all the mode up to 6.5mm shafts. Installing the nocks at dwelling house is an like shooting fish in a barrel process that requires few tools. Some items you volition want to have on paw include bowstring wax, a pair of needle nose pliers, and perchance a universal nock tool for inserting and indexing nocks. Organize your arrow shafts, tools, and Contender nocks on a clean level piece of work surface, and follow these few steps to smoothly install your new Contender lighted nocks by Nock Out.

Lancaster Archery Supply – Lighted Nock Contender Install

Steps to Proper Lighted Nock Setup

  • Remove the orange C clamp located midway on the nock trunk with needle nose pliers. This clip is used strictly for packaging purposes.
  • Place the arrow shaft size and the appropriate bushing for your arrow shaft.
    • Contender nocks fit 5mm or 10 shafts directly from the bundle with no bushing required.
    • 6mm (H) and half-dozen.5mm (South/GT) shafts require the use of the included advisable bushing.
  • For 5mm or X shafts at .204" ID the Contender Nocks are ready to install after the removal of the orange C clamp. Simply apply a liberal amount of bowstring wax to the lower nock torso and insert the nock into the shaft. Take care to alphabetize the nock to the arrow fletching according to your arrow rest. Never force your Contender Nocks into the shaft by forcing the nock and shaft down onto a hard surface without a nock tool.
  • When installing the Nock Out® Contender nocks into 6mm (H) or 6.5mm (Southward/GT) arrow shafts, outset remove the orange C clip on the lower nock trunk. Identify the appropriate bushing for your pointer shaft from the packaging. Insert the nock into the bushing before pushing the bushing into the arrow shaft. After installing the nock into the appropriate bushing with the orange C clip removed, employ liberal bowstring wax to the exterior of the bushing and insert into your pointer shaft. Have intendance to index the nock to the arrow fletching co-ordinate to your arrow remainder. Again, never force your Contender Nocks into the arrow shaft past forcing the nock and shaft down onto a hard surface without a nock tool.
  • Key takeaways to installing the Contender lighted nocks are to be sure and use bowstring wax on the nock body during installation, exercise non forcefulness the nock into the arrow shaft by pressing the nock downwards onto a hard surface, and remember to index the nock co-ordinate to your arrow's fletching and bow residue.

The Contender lighted nocks are activated by cord force per unit area at the shot. During the installation procedure information technology is easy to pull back on an installed nock that has been activated to turn off the illumination. Be sure your lighted nocks are not activated when y'all terminate the installation process to conserve battery life.